Showing 91–99 of 985 results
-
Banks Power 98-02 Dodge 5.9L Monster-Ram Intake w/ Boost Tube
$499.00(No)Monster-Ram raises boost without increasing backpressure at the turbine. Result: a more responsive, fuel-efficient engine. Up to six 1/8-inch NPT ports! At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key. Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it.
The Monster-Ram was designed using the latest in electronic computational fluid-dynamic technology, testing on the flow bench and dyno, and finally proven in the real world where the rubber meets the road. Monster-Ram is a beast that only Banks could have unleashed. With its simple, direct-replacement casting, Monster-Ram is instant power, performance, and acceleration gratification. It’s the perfect upgrade whether you’re just starting out or working to build a serious, purpose-built machine. With its up to six ports for pressure, temp, or flow sensors, the sky’s the limit for performance expandability. Monster-Ram is CNC port-matched to the stock heater as well as the optional Banks Billet Intake Heater Delete spacer.
Monster-Ram Intake System, 3.5-inch (red powder-coated), includes Boost Tube for 1998-2002 Dodge Ram 2500/3500 5.9L Cummins -
Banks Power 98-02 Dodge 5.9L Power Elbow Kit
$329.00(No)Slashes stock outlet and pipe back pressure by 60 Percent. Available separately or with Banks 4 inch Monster Exhaust Stainless 4 inch Monster TOP turbine outlet pipe
Removes the final restriction to power. Banks Power Elbow assembly slashes the stock outlet and pipe backpressure by 60%. Available separately or with Banks 4 inch Monster Exhaust. Includes: Cast, large-bore elbow housing, Stainless, 4 inch Monster T.O.P. turbine-outlet pipe,
Mounting hardware.
Note: Banks Brake and Banks Power Elbow cannot be used on the same vehicle.
Power Elbow Kit, includes Turbine Outlet Pipe and necessary hardware for 1998-2002 Dodge Ram 2500/3500 5.9L Cummins -
Banks Power Dual Gauge Pod Suction Mount For iDash 1.8 And 52mm Gauges
$68.00(No)Universal suction cup gauge mount designed to work with the iDash and other 52mm or 2-1/16 in. gauges. The adjustable arm allows for a wide range of mounting angles making this product universal for any vehicle. The sticky suction cup base can be mounted on the windshield or on the dashboard surface. The new Banks universal suction mount allows owners of the iDash SuperGauge or any standard 52mm (2-1/16 in.) gauge to affix it to their dashboard or windshield via the powerfully sticky suction cup. The adjustable arm allows for a wide range of mounting angles making this product universal for any vehicle. The versatile mount will accommodate gauges up to 32mm (1-1/4 in.) deep. Keeping with Banks Derringer tuner theme of a small hide-out gun, the mount has an attractive tapered bullet shape with cable opening hidden on the underside. The adjustable arm allows for a wide range of mounting angles making this product universal for any vehicle. The kit comes with a hex key for adjustment and alcohol pad for surface preparation.
Dual Gauge Pod Suction Mount, 52mm, Sticky Base Suction Mount for iDash 1.8 and 52mm (2-1/16 IN) gauges
Gauges sold separately. -
Banks Power iDash 1.8 DataMonster / Super Gauge – 3 Pin 15PSIA 1/8NPT Thread Pressure Sensor
$64.00(No)Stainless steel pressure transducer with 1/8 NPT threads. In 5 PSIA ranges from 0-15PSIA up to 0-232PSIA.
Stainless steel pressure transducer with 1/8 NPT threads. 0-15 PSIA range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations in iDash for quick setup.
Key Features: Stainless steel pressure transducer, 1/8 NPT threads, 15 PSIA range, High accuracy and fast responding sensor, Plug and Play with Banks 4-CH Analog Module, Works with pre-defined configurations in iDash for quick setup.
Pressure Sensor, 15 PSIA, 1/8 NPT, Stainless Steel, 3 PIN for iDash 1.8 DataMonster and Super Gauge
Plug-and-Play with Banks 4-CH Analog or 5-CH Analog with Frequency Modules. -
Banks Power iDash 1.8 DataMonster / Super Gauge – 3 Pin 15PSIG 1/8NPT Thread Pressure Sensor
$72.00(No)Stainless steel pressure transducer with 1/8 NPT threads. In 4 PSIG ranges from 0-15 PSIG to 0-150PSIG.
Stainless steel pressure transducer with 1/8 NPT threads. 0-15 PSIG range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations in iDash for quick setup.
Pressure Sensor, 15 PSIG, 1/8 NPT, Stainless Steel, 3 PIN for iDash 1.8 DataMonster and Super Gauge
Plug-and-Play with Banks 4-CH Analog or 5-CH Analog with Frequency Modules. -
Banks Power iDash 1.8 DataMonster / Super Gauge 5 Ch Analog with Frequency Module System
$363.00(No)Connects to your iDash to add 4 Analog Sensor inputs plus 1 Frequency signal input per module. Works with a wide variety of Banks plug-and-play sensors as well as custom analog or resistance sensors. Each channel can be configured to any parameter. Harness length is 5 feet per analog sensor branch and frequency channel is 8 inch. The 5-Ch Analog with frequency Module Connects to your iDash and adds 4 Analog Sensor inputs plus 1 Frequency signal input per module. The system works with a wide variety of Banks plug-and-play sensors as well as with your custom analog or resistance sensor. Each channel can be configured to any parameter making this a very flexible module. Harness length is 5 feet per analog sensor branch and 18 inches for frequency channel to accommodate almost any sensor location. Daisy chain up to 6 Thermocouple Modules and 6 Analog Sensor Modules per system allowing you to add over 48 new sensors to your Banks iDash DataMonster or SuperGauge.
Key Features: The 5-Ch Analog Module, Connects to your iDash, Adds 4 Analog and 1 Frequency Sensor input per module., The system works with a wide variety of Banks plug-and-play sensors., Also works with your custom analog or resistance sensor., Each channel can be configured to any parameter making this a very flexible module., Combine with other Banks Sensor Modules to use additional sensors., Daisy chain up to 6 Thermocouple and 6 Analog Sensor Modules per system, Connects inline with Banks Derringer, and other Sensor Modules for easy connectivity.
5 Ch Analog with Frequency Module System for iDash 1.8 DataMonster and SuperGauge
Note: 66556 B-Bus Starter kit required except for customers with a Derringer or other B-Bus Module already installed.
Does not include mounting bracket sold here. -
Banks Power iDash 1.8 DataMonster / Supergauge K type, Grounded Tip, Thermocouple Sensor INC600
$54.00(No)K-Type Thermocouple with 1/8 NPT compression fitting. Plug and Play with Banks 4-CH thermocouple Module. Adjustable insertion depth of up to 7/8. 6 ft 5 in cable length. 0-1650 deg F temperature range.
Thermocouple, 0-1650 deg F range, K type, Grounded Tip, INCONEL, 1/8 NPT compression fitting for iDash 1.8 DataMonster and Super Gauge
Plug-and-Play with Banks 4-CH Thermocouple Module. -
Banks Power iDash 1.8 DataMonster Universal CAN Expansion Gauge w/ Data Logging
$395.00(No)Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. With its easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters and internal data directly the vehicles ECU via OBD-II. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night. Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis. For those who want to record their vehicles parameters, the iDash DataMonster adds data logging for up to 100 user selectable parameters at a rate of up to 20 samples per second. With the included microSD card, owners can log over a months worth of continuous data. Data can be played back right on the iDash or transferred to a computer for deeper analysis. Expand functionality with Banks Modules (Pressure/Temp Sensors, and more).
Banks iDash 1.8 DataMonster, Universal CAN, Gauge Expansion Kit for ALL 2008+ OBDII CAN bus vehicles
Fits All Standard 52mm Gauge Mounts. Gauge Mount NOT included purchase one here. Add-On Gauge. Requires any Primary iDash DataMonster or SuperGauge for vehicle communication. -
Banks Power iDash 1.8 DataMonster Universal CAN Stand-Alone Gauge
$419.00(No)Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. With its easy to read 2- to 8-gauge user selectable LCD display, the iDash 1.8 reads a multitude of engine parameters and internal data directly the vehicles ECU via OBD-II. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night. Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis. For those who want to record their vehicles parameters, the iDash DataMonster adds data logging for up to 100 user selectable parameters at a rate of up to 20 samples per second. With the included microSD card, owners can log over a months worth of continuous data. Data can be played back right on the iDash or transferred to a computer for deeper analysis. Expand functionality with Banks Modules (Pressure/Temp Sensors, and more).
Banks iDash 1.8 DataMonster, Universal CAN, Stand- Alone for ALL 2008+ OBDII CAN bus vehicles
Primary Gauge, For those who do not currently have any Banks electronics installed. OBD-II cable is included in this kit. Gauge Mount NOT included purchase one here. Fits All Standard 52mm Gauge Mounts
