Showing 64–72 of 985 results
-
Banks Power 17-24 Chevrolet/GMC 2500/3500 6.6L Duramax L5P Monster-Ram Turbo Inlet Elbow – Natural
$289.00(No)The Banks Monster-Ram Turbo Inlet for the 2017-2024 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge. More than a year in development, the Monster-Ram increases air mass flow to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased.
-
Banks Power 17-24 Chevrolet/GMC 2500/3500 6.6L Duramax L5P Monster-Ram Turbo Inlet Elbow – Red
$299.00(No)The Banks Monster-Ram Turbo Inlet for the 2017-2024 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge. More than a year in development, the Monster-Ram increases air mass flow to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased.
-
Banks Power 19-21 Dodge Ram 6.7L Ram-Air Intake System – Dry Filter
$469.00(No)Feeds your Cummins engine cooler, denser, outside air for sustained pulling power and fuel economy. Eliminates airflow restrictions found in the factory airbox, filter, and intake track. Over 51 percent higher Mass Air Flow vs stock. Banks Ram-Air Intake feeds your 6.7L Cummins engine cooler, denser, outside air for greater power and fuel economy. Experience the benefits of greater flow, performance, and sound over stock. Its performance is extensively tested and validated: in the computer, using Computational Fluid Dynamics software – on the flowbench – and later, on the vehicle.
-
Banks Power 19-21 Dodge Ram 6.7L Ram-Air Intake System – Oiled Filter
$469.00(No)Feeds your Cummins engine cooler, denser, outside air for sustained pulling power and fuel economy. Eliminates airflow restrictions found in the factory airbox, filter, and intake track. Over 51 percent higher Mass Air Flow vs stock. Banks Ram-Air Intake feeds your 6.7L Cummins engine cooler, denser, outside air for greater power and fuel economy. Experience the benefits of greater flow, performance, and sound over stock. Its performance is extensively tested and validated: in the computer, using Computational Fluid Dynamics software – on the flowbench – and later, on the vehicle.
-
Banks Power 19-21 Ram 2500/3500 6.7L Cummins Boost Tube Upgrade Kit – Red
$495.00(No)Banks massive 3.5 inch boost tubes are the largest on the market, flowing more air than stock! Smooth mandrel-bent tubes deliver more air to your engine while reducing boost pressure loss resulting in quicker turbo spool and more power. Banks Boost Tubes are the largest charge air cooler pipes in the industry, measuring in at a full 3.5 inches. The factory intercooler pipes are 2.70 inches in diameter on the hot side with crush bent corners and 3.15 inches on the cold side with plastic components. By contrast, Banks Boost Tubes are made of high-quality aluminized steel for maximum strength and durability. With Banks Boost Tubes’ smooth bends, your turbo can spool quicker thanks to improved boost pressure retention for maximum horsepower. The Boost Tubes work with the stock 6.7L Cummins intake components by using proprietary high-strength 5-ply silicone hoses. Or can be combined with the 3.5″ Banks Monster-Ram for maximum Mass Air Flow.
-
Banks Power 19-24 Ram 2500/3500 6.7L Diesel Monster-Ram Intake System
$718.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2019-2024 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 19-24 Ram 2500/3500 6.7L Diesel Monster-Ram Intake System – Black
$748.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2019-2024 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 19-24 Ram 2500/3500 6.7L Diesel Monster-Ram Intake System – Red
$748.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2019-2024 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks&rsquo, High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 19-24 RAM 2500/3500 Gauge Pod Kit – Dual Gauge
$129.00(No)iDash Stealth Pods are direct-fit gauge mounts that affix to your 2019-24 RAM 2500/3500 factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics.
Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors.NOTE: iDash Gauge not included. Fitment for non iDash gauges is not guaranteed
