Showing 73–81 of 985 results
-
Banks Power 19-24 Ram 3500/4500/5500 6.7L Diesel Monster-Ram Intake System w/Fuel Line – Natural
$868.00(No)Upgrade your fleet vehicles and protect your investment from grid heater bolt failure. Don’t let the stock elbow and heater kill performance or your engine. Get back all that power you lose with 88.3 percent greater Mass Air Flow for a more responsive, reliable, power-efficient engine. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No.1 fuel line. Banks Engineers designed a new No.1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 19-24 Ram 3500/4500/5500 6.7L Diesel Monster-Ram Intake System w/Fuel Line – Red
$898.00(No)Upgrade your fleet vehicles and protect your investment from grid heater bolt failure. Don’t let the stock elbow and heater kill performance or your engine. Get back all that power you lose with 88.3 percent greater Mass Air Flow for a more responsive, reliable, power-efficient engine. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No.1 fuel line. Banks Engineers designed a new No.1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 20-22 Chevy/GMC 2500/3500 L5P 6.6L Ram-Air Intake System
$495.00(No)A groundbreaking cold air intake featuring the patented Banks Air Mass Control Module. The electronic device allows our engineers to use the Banks SuperTube, a massive free-flowing intake tube, larger than stock and all competitors.A?No other cold air intake even comes close in size or airflow. Adds power, sharpens turbo response, and improves fuel economy. Beats stock and competitors in mass airflow, pressure retention, and dirt capacity. Provides a strong induction note. Brand new for the 2020-2023 Duramax L5P platform, the Banks Ram-Air intake is a game-changer. With 2020 and up Duramax engines, GM has further tightened the allowable range for induction tuning. To counter this, Banks engineers have designed a new patented Air Mass Control Module that allows an intake design to go beyond these limitations for truly unmatched airflow performance.
With a Big-Ass filter, huge induction tube and a unique bellowed silicone coupler to allow for engine movement while tapering down to increase air density, your 6.6L engine will breathe easy and cleanly. Its enclosed airbox design keeps power-robbing heat away and attaches to the OEM hood and front ram air scoops for even better performance at speed on the highway. An extra side inlet opens up to the wheel well for fresh air and a strong induction note sound. -
Banks Power 20-22 Chevy/GMC 2500/3500 L5P 6.6L Ram-Air Intake System – Oiled
$495.00(No)A groundbreaking cold air intake featuring the patented Banks Air Mass Control Module. The electronic device allows our engineers to use the Banks SuperTube, a massive free-flowing intake tube, larger than stock and all competitors.A?No other cold air intake even comes close in size or airflow. Adds power, sharpens turbo response, and improves fuel economy. Beats stock and competitors in mass airflow, pressure retention, and dirt capacity. Provides a strong induction note. Brand new for the 2020-2023 Duramax L5P platform, the Banks Ram-Air intake is a game-changer. With 2020 and up Duramax engines, GM has further tightened the allowable range for induction tuning. To counter this, Banks engineers have designed a new patented Air Mass Control Module that allows an intake design to go beyond these limitations for truly unmatched airflow performance.
With a Big-Ass filter, huge induction tube and a unique bellowed silicone coupler to allow for engine movement while tapering down to increase air density, your 6.6L engine will breathe easy and cleanly. Its enclosed airbox design keeps power-robbing heat away and attaches to the OEM hood and front ram air scoops for even better performance at speed on the highway. An extra side inlet opens up to the wheel well for fresh air and a strong induction note sound. -
Banks Power 20-22 Ford F250/350 6.7L RAI Diesel Ram-Air Intake System – Oiled Filter
$469.00(No)Increases Mass Air Flow by 36% vs stock for more power and better fuel economy. Enclosed housing keeps out hot power-robbing heat with direct access to cool air. Largest capacity air filter on the market for extended service life between cleaning.
Super Duty Ram-Air Induction. Banks Ram-Air Intake feeds your 6.7L Power Stroke engine cooler, denser, outside air for greater power and fuel economy. Unlike the OEM airbox with its harsh bends and internal baffles, the Ram-Air’s streamlined and optimized shape maintains air velocity and increases air density. Experience the benefits of greater flow, performance, and sound over stock. Its performance is extensively tested using Computational Fluid Dynamics software, validated on the flow bench, and proven on the vehicle in the real world.Key Features: “Big Ass Filter” extends service life and requires fewer cleanings, Side fender vent for additional sound and cold air induction
Unique silicone elbow with bellows allow for engine movement, Over 116.7 in2 more filtration media vs our closest competitor, Massive two piece XLPE airbox insulates against heat soak, Enclosed housing keeps out hot, power-robbing engine air, Largest filter on the market with 537.3 in3 total volume, Oversized airbox increases cool air volume around filter, More audible and aggressive induction note, Connects to OEM forward air inlet, 5-year limited warranty, Oiled air filter element, No check engine light
Banks Ram-AirA? Intake System; Incl. Big-Ass Oiled Filter/Housing/Ducting/Intake Pieces/Hardware/Clamps;
Does Not Fit Right Hand Drive Trucks
2020-2022 FORD F250/F350/F450 6.7L -
Banks Power 2007.5-2012 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line – Black w/Heater System
$748.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2007-2012 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Bank’s High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 2007.5-2012 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line – Red w/Heater System
$748.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2007-2012 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Bank’s High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 2007.5-2012 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line-Natural w/Heater System
$718.00(No)The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2007-2012 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Bank’s High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. -
Banks Power 2008+ Universal CAN Bus iDash 1.8 Super Gauge – For Use w/ PedalMonster
$419.00(No)Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. With its easy-to-read 2- to 8-gauge user-selectable LCD display, the iDash reads a multitude of engine parameters and internal data directly from the vehicles ECM via OBD-II. It also opens a whole new world of Banks exclusive calculated parameters not available on any other device. Set custom low and high alerts for any engine parameter. Monitor max and min values for a user-selectable list of parameters. Read and clear trouble codes on-the-fly. Customize the navigation button and LCD display colors, brightness, and even the rate at which they dim at night. Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously. Add Banks sensor modules such as the 4-channel analog module, 4-channel thermocouple module, and AirMouse Ambient Air Density Module for nearly infinite vehicle and weather analysis. Want to record your vehicles parameters? The iDash DataMonster adds data logging for up to 100 user-selectable parameters at a rate of up to 20 samples per second. With the included microSD card, owners can log over a months worth of continuous data. Data can be played back right on the iDash or transferred to a computer for deeper analysis. Expand functionality with Banks Modules (Pressure/Temp Sensors, and more).
Banks iDash 1.8 DataMonster, Universal CAN, for use with PedalMonster for ALL 2008+ OBDII CAN bus vehicles
Kit designed to be used with a currently installed PedalMonster. No OBD-II cable is included in this kit. Gauge Mount NOT included purchase one here. Fits All Standard 52mm Gauge Mounts
