Highly recommended in dirty environments. Keep your Ram-Air Filter protected from large debris, bugs, mud, etc… Built from a breathable material, the Banks Pre-Filter simply goes over your air filter and provides additional protection and can even extend cleaning intervals. Works with both Dry and Oiled filters. Banks pre-filter wraps are designed to work with your Ram-Air intake system and are constructed from a polyester mesh with uniform micron openings. It improves the filtering of larger debris and dirt by preventing them from getting embedded into the filter. This allows your your Banks Ram-Air to breathe easier for longer by increasing the time between services. Its hydrophobic surface has been treated to repel water and improve performance in humid or wet environments. The pre-filter is able to resist heat up to 400 degrees Fahrenheit and will not shatter in freezing temperatures.

Feeds your Cummins engine cooler, denser, outside air for sustained pulling power and fuel economy. Eliminates airflow restrictions found in the factory airbox, filter, and intake track. Over 51 percent higher Mass Air Flow vs stock. Banks Ram-Air Intake feeds your 6.7L Cummins engine cooler, denser, outside air for greater power and fuel economy. Experience the benefits of greater flow, performance, and sound over stock. Its performance is extensively tested and validated: in the computer, using Computational Fluid Dynamics software – on the flowbench – and later, on the vehicle.

The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2019-2024 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Bank’s High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky’s the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.